There are several different knife storage options for the home kitchen. The knife block is a very popular way of storing your knives. Knife blocks look good and are very convenient -- perhaps too convenient. If you've got children, storing your knives in a block is a dangerous proposition. So, is using a magnetic bar mounted to the wall. For households with hands controlled by inquisitive minds, it's generally best to keep your knives tucked away in a drawer. Improper storage in a drawer, however, can be more dangerous (to both you and the knife) than storing the knives on the counter or wall. Loose knives are an accident waiting to happen the next time you reach into your drawer without paying attention. The knives may also chip while rattling against each other as you open or close the drawer.
Using an in-drawer knife tray can protect your knife and help you organize them too. I have two problems with knife trays. First, they consume a fair amount of precious drawer space, and, second, I can't seem to find a tray that can handle the different knife shapes (and brands) that I have. There's always one or two knives that just don't fit properly. So, I've taken to using knife covers and placing the knives in a drawer organizer tray.
Related Articles
Forschner's Edge-Mag comes in a variety of lengths ranging from 12 inches to 3 inches. The cover is only a couple millimeters thick (like those plastic covers that you cut into), but is capable of unfolding.
Basically, it's two magnetic strips that are held together along a joint set in the long side of the cover. When opened, the Edge-Mag can be washed and fully dried (important to avoid rusting of your knife).
The knife can be easily inserted by placing the flat part of the blade directly onto the interior surface. The magnet holds the knife firmly in position.
Closing the other side of the Edge-Mag completes the magnetic sandwich that securely holds the knife without increasing the thickness of the knife by too much. Enclosed in the Edge-Mag the knife is safe for storage. Also, I've found this to be the best way to protect knives in a knife roll or bag. The cover doesn't take too much space, and, when several of the Edge-Mags are stacked near each other, the magnets help keep the knives from moving during travel (the Edge-Mags covers "stick" to each other).
I purchased my Edge-Mags from my local restaurant supply store (Garden City). A few retailers on-line also have the Edge-Mags:
Accurate Sharpening & Cutlery Sales
Smokey Mountain Knife Works
I also like using the LamsonSharp KnifeSafe. It's a bit bulkier than the Edge-Mag, but it completely covers the entire blade in plastic.
The cover opens up on hinges and can be washed easily enough. Make sure the knife and the KnifeSafe are both completely dry before storing the knife (to prevent rust).
The knife sits in the KnifeSafe on top of two rubber pads. Opposing rubber pads on the other side of the cover holds the knife in place when closed. The KnifeSafe comes in four sizes. The largest is able to hold knives of 10-in. to 8-in. in blade length and the smallest holds 2-1/2 to 4-1/2 inch knives. Because of the placement of rubber pads, it's important to get the correct size (while a large Edge-Mag can be used for any size knife).}?>
When closed, two tabs lock the cover in position, and the knife is secure. The KnifeSafe is great for transporting a knife from one location to another - your neighborhood knife sharpener will thank you.
I picked up my KnifeSafes from Sur La Table for about $5 each. For some reason, their online website does not have them, so I offer you this link from Chef's Resource instead.}?>
Related Articles
It also sells the Max-Edge knife protectors.
http://www.accuratesharp.com/knife_storage.htm
-t
Even if you have a knife roll, you'll need a knife cover for each knife in the roll. At least my roll (and the rolls that I've seen), doesn't protect the blade. The Edge-Mag and the plastic covers you cut into are the only ones slim enough to work well enough in a full knife roll.
Blade side up is definitely one way to avoid your knives scraping against wood, but it's also quite dangerous. Every knife block manufacturer will tell you not to place your blades upside down in their knife blocks. The danger is two fold (as it was explained to me): 1. People expect the blades to be facing down. A visitor extracting a knife from your block may not realize that the blade is facing the opposing direction. 2. With the knife handle on the bottom and the curve of the blade on top, the knife has a greater tendency to slide out of the block if tilted or partially extracted. If the knife was not properly inserted fully into the block, the knife can slip out instead of in as expected.
Most block manufacturer's that I've spoken to feel that the wood does not appreciably dull the knife when you insert the knife into the block. You're not cutting into the block, you are inserting the knife and the blade runs along the wood (just like when you slice food on your cutting board). Some knife block manufactuer's make blocks with slots going sideways (like the one I own), but they came this is for aesthetic reasons and not to reduce wear on the knives.
You can visit me at www.knifeguard.com :D :D :D
If you have an idea
Thank you
Alain
homevisa@nospamhotmail.com
jessa
tOM
When the kn is Edge DOWN, it is resting on the heal of blade & top of tip against wood. Correct
When in block EDGE UP, kn is now resting on spine of blade ( where you may rest your thumb ) & about 1-2" in from the tip ,Right On the Edge, dulling a very usefull part of the edge.
We own a chain of cutlery stores & a couple of months into each new employees time, we come in to see all the knives in blocks up side down. Everyone must think of this revelation at one time or another.
tOM
I do the exact same thing. It is very convenient and makes them easy to access.
Thanks
If you can find the magnetic covers (Forschner Edge-Mag) then I'd suggest using that and just covering the edge of the cleaver. The rest will hang out, but at least the sharp parts will be covered.
When the kn is Edge DOWN, it is resting on the heal of blade & top of tip against wood. Correct
When in block EDGE UP, kn is now resting on spine of blade ( where you may rest your thumb ) & about 1-2" in from the tip ,Right On the Edge, dulling a very usefull part of the edge.
YES!!! Horizontal is the best way. The knives don't rest on ANY part of the edge. Furthermore, the knife block slot doesn't get worn when you slide the knife in and out. At least that happened to my first knife block that had vertical slots. My horizontal slotted block is now older and gets more use than my first one and doesn't show that wear pattern.
please feel free to visit my food blog, My Halal Kitchen at http://www.myhalalkitchen.com
all the best.
Oh man, why would anyone leave food on their knives?
These can be cut to size for any knife.
Call us for more info.
800-714-8226
Here is a link to one brand. There are other companies that make it with the same design too.
http://www.chefknivestogo.com/wusthof-in-drawer-knife-holder.html
F. Green